CO2 Glass Tube Machine
- Response of blend of gasses within an encased tube under void results in making of glass tube Co2.
- Glass tube contemplating the DC energy supplies offers effortlessness.
- Glass tube forms round laser beam, as the round pipe clasps in the gasses.
- This glass tube CO2 can be water-chilled; beneficial factor when customers want their system to work for longer time in a place where the temperature fluctuates fundamentally or goes more than 75 degrees.
- Glass tube CO2 when water chilled turns into kept at a consistent temperature that results in steady power.
- It can provide years of functionality within the budget of customers.
- It comes with two scanners, two cutting heads and two focus lengths; that allows operator to select head and mode to meet the clinic requirement.
Glass, electrode and resonance horny glass are the parts of the machine. The component is produced by water chilling set, discharging pipe, gas storage area and trachea. CO2 Seal laser device is three layers tube, encompassing inner releasing tube, water-purge set at center and the exterior gas stockpiling layer.
Some portion of the electrode: CO2 laser machine normally embraces the barrel shaped, chilly cathode, the negative shaft material determination has impact on the life expectancy. The top requirements are less sputter rate, little gas assimilation rate and nickel is the metal material used.
- Outer water cooler is not required, eliminating a system that demand more handling.
- Better thermal dispersal that extends the life expectancy of laser tube.
- The operations of machine will continue interrupted for 4-6 years, followed by requirement for recharge.
It is recommended to check water flow and make sure there are no bubbles before using.
Periodically check yield mirror of negative shaft to make sure there is no grease or dust spot, and if does then clean them away using a blend of cotton and aether to prevent its impact on life expectancy induced by facula and power.